Three in One

TIMRO is the first thermal imaging device that was designed from its inception as a 3-in-1 weapon sight, head-mounted and hand-held monocular and achieves the highest performance levels in each of these fields of in comparison with other thermal mounted thermal imaging devices. This was made possible by the use of cutting-edge technology.


The high performance optotronic lens guarantees a resolution of 640x480 and a 38 field of view. It not only has an image four times sharper than the best systems currently available on the market, but the TIMRO's electronic filter also allows very good orientation. Depending upon requirements,
the user can focus on searching for people or alternatively on orientation in indoor environments with poor visibility.


  TIMRO 640z TIMRO 640m
Application Hunting, Security, civilian use (restricted export) Government authorities only
(restricted export)
Resolution Mikrobolometer 640x480 pixel
640x480 pixel
Temperature Resolution 50 mK
Zoom 1x, 2x, 4x, 8x
Spectralband 7,5-13,5μm
Suitable for Sun Light looking directly the sun is possible for short periods
Filter Mode White Hot, Black Hot, Booster, Search
Angle of view Horizontal 32° / Vertical 26°
Battery 2xCR123 Running time approx. 4-5h
Usable as
- Handheld device Yes
- Goggles Yes
- Weapon Sight No
prohibited under Appendix 2 of § 2 para 2-4 Weapons Act - Weapons List - Section 1 No. and
 according to MIL810F
- Weaponmount STANAG (ARMS and Recknagel available as an accessory)
- Weapon database Up to 6 weapons can be stored
Snap-on-module (optional) custom made Standard
- Laserdesignator Infrared, red, green (from early 2013)
- Integr. PAL recording From mid 2013
-Wireless 2013
- Battery Backup on demand
Corner view available
Video Input/Output PAL
Polarity White hot/ Black hot
Compass +- 2°
PIN Code 5-digits, (cycle adj ustable between 1 and 250)
Operating Temperature -40°C to 60°C
Storage Temperature -40°C to 60°C
Water Tightness IP65
Shock MIL 810F 516 IV (26 drops from 48 Inch)
Material Housing, lens cap , battery cover: Titanium Grade 5 (laser-sintered)
Eyepiece PMMA with a removable protective foil
Dimensions Length:65mm; Width:48mm; height:70,5mm (without attachments)
Accessories Rubber Eyecup, Eyepiece protection sheet, red filter,
Optional: Rhino head / helmet mount, SPUHR head- / helmet mount, PAL cable, InterLink
cable, transportation support
Weight about 220g (including batteries without accessories)

 Timro Brochure